Product Details
â– 1GE+WIFI is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier-class FTTH application provides data service access.
â– 1GE+WIFI is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
â– 1GE+WIFI adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
â– 1GE+WIFI is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
â– XPON 1GE+WIFI are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
Â
Technical Item
|
Details
|
Model
|
H102
|
Feature
|
Supports Dual Mode (can access GPON/EPON OLT).
|
Supports GPON G.984/G.988 standards
|
Support 802.11n WIFI (2x2 MIMO) function
|
Support NAT, Firewall function.
|
Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
|
Support port mode of VLAN configuration
|
Support LAN IP and DHCP Server configuration
|
Support TR069 Remote Configuration and WEB Management
|
Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
|
Support IPv4/IPv6 dual stack
|
Support IGMP transparent/snooping/proxy
|
In compliant with IEEE802.3ah standard
|
Compatible with popular OLT (HW, ZTE, FiberHome...)
|
PON interface
|
1 G/EPON port(EPON PX20+ and GPON Class B+)
Upstream: 1310nm; Downstream: 1490nm
SC/UPC connector
Receiving sensitivity: ≤-27dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
|
LAN interface
|
1x10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
|
WIFI Interface
|
Compliant with IEEE802.11b/g/n
Operating frequency: 2.400-2.4835GHz
support MIMO, rate up to 300Mbps
2T2R,2 external antenna 5dBi
Support: Multiple SSID
Channel:13
Modulation type: DSSSã€CCK and OFDM
Encoding scheme: BPSKã€QPSKã€16QAM and 64QAM
|
LED
|
7 LED, For Status of POWER, LOS, PON, LAN1~LAN2, WIFI, WPS
|
Push-Button
|
4, for Function of Power on/off, Reset, WPS, WIFI
|
Operating condition
|
Temperature : 0℃~+50℃
Humidity :10%~90%(non-condensing)
|
Power supply
|
DC 12V/1A
|
Net Weight
|
<0.4kg
|
Power Consumption
|
<6W
|
Â
Pilot Lamp
|
Status
|
Description
|
WIFI
|
On
|
The WIFI interface is up.
|
Blink
|
The WIFI interface is sending or/and receiving data (ACT).
|
Off
|
The WIFI interface is down.
|
WPS
|
Blink
|
The WIFI interface is securely establishing a connection.
|
Off
|
The WIFI interface does not establish a secure connection.
|
PWR
|
On
|
The device is powered up.
|
Off
|
The device is powered down.
|
LOS
|
Blink
|
The device doses not receive optical signals or with low signals.
|
Off
|
The device has received optical signal.
|
PON
|
On
|
The device has registered to the PON system.
|
Blink
|
The device is registering the PON system.
|
Off
|
The device registration is incorrect.
|
LAN
|
On
|
Port is connected properly (LINK).
|
Blink
|
Port is sending or/and receiving data (ACT).
|
Off
|
Port connection exception or not connected.
|
http://www.fiberidea.com/