Product Details
Specifications
Name |
Specification |
Model |
SJ-B1300B |
SJ-B1450B |
SJ-B1600B |
Max. Paper size(W*L) |
1300*1100 mm |
1450*1100 mm |
1650*1100 mm |
Min. Paper size(W*L) |
400*400 mm |
500*500 mm |
Face paper thickness |
150-500 g/㎡(standard paper board) |
Bottom paper |
A B C E F flute |
Layer requirement |
Face paper+2-ply corrugated sheet =3 ply, Face paper+4-ply corrugated sheet =5 layer(Total thickness less than 10mm) |
Precision |
±1.5mm(according to the paper quality) |
Speed |
100 m/m(theoretical value ) |
90 m/m(theoretical value ) |
Production efficiency |
0-5000 sheets/h |
0-4500 sheets/h |
Height of face paper pile |
1500mm |
Max. Weight of face paper pile |
500kg |
Height of bottom paper pile |
400mm |
Total Power |
10 KW |
Voltage |
Three phase 380V |
Efficient pressing length |
3600 mm |
Conveying height |
250 mm |
Adhesive medium |
Corn starch glue |
Dimension(L*W*H) |
10500*2200*2600 mm(Subject to machine) |
10500*2400*2600 mm(Subject to machine) |
12500*2550*2600 mm(Subject to machine) |
Machine Weight |
About 5 T(Subject to machine) |
About 5.2 T(Subject to machine) |
About 5.5 T(Subject to machine) |
Features of the machine
a) Key Points:
1. With the help of high quality and balance tested roller, the machine is stable and durable.
2. Glue saving, averagely 25-35grams glue per square meter.
b) General Introduction:
SJ-B series Semi automatic flute laminator is consists of automatic face paper lifting section, face paper conveying section, bottom paper conveying section, cyclic gluing section Front lay position section Pre pressing shaping section and pressing section. It suits to laminate the printed paper to the corrugated board or cardboard which is thicker than 350gsm, with features of high precision and high speed. It is the ideal laminating machine for all kinds of packaging company domestic and overseas.
c) Features by parts:
1. Face/bottom paper side lay use hand wheel and position display to adjust left and right, which make the paper loading accurately. Limited switch fixed on face paper loading section makes the lifting action precisely.
2. Pressing roller adopts the specialized roller which is used on print machine, it can delivery both thick and thin paper effectively. Anti-curl structure helps to delivery face paper at the same time.
3. Bottom paper feeding section adopt vacuum sucking belt with high strength and high friction allowing the non-stop feeding. Paper supporter equipped on this section makes it possible to feed the long size sheet.
4. Knurled roller on the bottom feeding part makes sure the stable running when the machine in a high speed.
5. Gluing system has liquid level detect needle, glue will be supplied accordingly and recycled to save glue cost.
6. The gluing system in this machine is a combination of anilox steel roller and rubber glue even roller, in which the rubber roller is crowned design and differential speed gluing method is applied to make a even glue and increase the gluing quality. Averagely 25-35grams glue per square meter, reducing the cost and improving the laminated paper board quality.
7. Semi automatic flute laminator both bottom paper and face paper adopt spring front lay so that there is no need to readjust for big or small paper. The intelligent control system makes it possible to adjust the face paper position automatically when the machine is running. The digital display of front lay part can make the front lay adjustment range to 0.1mm.
8. Photoelectric detector helps the conveying of top and bottom paper accurately.
Grooved steel positioning roller has long service life and easy to clean.
9. Double pre-pressing roller are equipped on the laminating unit.
10. Automatic damp system is applied on the bottom sheet feeding system to prevent the curving of the laminated sheet.
11. Pressing conveyor makes it possible to adjust the pressure according to the paper board thickness.
12. All the electrical components are imported brand-safe and reliable. Many control knobs are equipped on the machine to allow the operator control the machine in different position; machine speed is controlled by the frequency converter which makes the machine run stably.
13. Semi automatic flute laminator is driven by imported timing belt and wheel gear with high efficiency, low noise and stable running status.
14. Stainless steel is applied on the corrosive part of the machine, it can prevent the corrosion from the glue.
Laminated paper board
Configurations
NO. |
Name |
Brand |
Quantity |
1 |
Touch screen |
Delta |
1 piece |
3 |
Servo motor |
Sinee |
1sets |
4 |
Frequency converter |
Delta |
5 sets |
5 |
Main motor |
China |
2 sets |
6 |
Lifting motor |
China |
2 sets |
7 |
Conveyor motor |
China |
2 sets |
8 |
Clutch/Brake |
China |
1 set |
9 |
Chain |
Renold |
30 meters |
10 |
Timing belt |
Gates |
14 pieces |
11 |
Contactor |
Honeywell/Schneider |
8 pieces |
12 |
Relay |
Honeywell/Schneider |
15 pieces |
13 |
Button switch |
Schneider |
25 pieces |
14 |
Sucking belt |
NITTA |
10 pieces |
15 |
Conveying belt |
SEIGLING |
8 pieces |
16 |
Fan |
CHINA |
2 sets |
Attached spare parts and tools
NO. |
Name |
Quantity |
1 |
Approach switch |
1 piece |
2 |
Limited switch |
1 piece |
3 |
Photoelectric switch |
1 piece |
4 |
Relay |
1 piece |
5 |
Separator |
6 pieces |
6 |
Suction nozzle rubber |
8 pieces |
7 |
Pressing wheel |
8 pieces |
8 |
Grease gun |
1 piece |
9 |
Oil gun |
1 piece |
10 |
300 Monkey Wrench |
1 piece |
11 |
150 Monkey Wrench |
1 piece |
12 |
Open spanner 10-12 |
1 piece |
13 |
Open spanner13-15 |
1 piece |
14 |
Internal hexagonal wrench |
1 set |
15 |
TOP Tape measure 3 M |
1 piece |
16 |
Sharp-nose pliers |
1 piece |
17 |
Big pliers |
1 piece |
18 |
Glue Barrel |
2 pieces |
Other information
1. The above price is based on FOB Tianjin, China.
2. The enclosed pictures are just for reference, kindly please make the specification and object as the standard.
3. As for the overseas installation, the installation will last 10 days and the customer shall pay each installation person 50.00USD per day and bear the costs of air trip tickets, food and accommodation.
4. The fabrication period is within 50 days and the installation period within around 15 days after the advance payment received.
5. 30% advance payment paid by T/T before fabrication and 70% balance payment paid by LC or TT before delivery.
http://www.tsjiasun.com/